Warranty Information

ManualsBrandsEbern Designs ManualsCeiling LightsMcculloch 1 - Light 17'' Simple Circle LED Flush Mount

LIMITED WARRANTY

Limited Warranty (“Warranty”): Subject to the exclusions set forth below, We warrant that all of our products will be free from defects in material

and workmanship which cause the products to fail to operate in accordance with the specifications set forth in the documentation published or

provided with the Products (the “Specifications”) for a period of one (1) year from the date of shipment (“Non-LED Warranty Period”) and all our

light emitting diode (“LED”) Products, will be free from defects in material and workmanship which cause the products to fail to operate in

accordance with the Specifications for a period of five (5) years from the date of shipment (“LED Warranty Period”). For purposes of this Warranty,

references to “Warranty Period”

shall refer to either the Non-LED Warranty Period or the LED Warranty Period, depending on the type of Product

purchased by the End User. We warrants that any standard finish on a product (other than Home style branded products) will be free from

cracking, peeling, excessive fading, and corrosion defects during the applicable Warranty Period. Extended warranties for our fan motors and other

products may apply; please refer to our manuals for more information. For LED Products, the LED arrays in the products will be considered

defective in material or workmanship only if a total of 15% or more of the individual LEDs in the products fail to illuminate.

Exclusions: This Warranty applies only when the products have been properly handled, stored, wired, transported, installed, operated and

maintained in accordance with the applicable Specifications, including, without limitation, installation in applications in which ambient

temperatures are within the range of specified operating temperatures and operation within the electrical values shown on the Specifications. We

shall have no responsibility under this Warranty for any failure of the products that results from external causes including without limitation: acts

of nature; physical damage; exposure to adverse or hazardous chemicals or other substances; use of reactive cleaning agents and/or harsh

chemicals to clean the products; environmental conditions; vandalism; fire; power failure, improper power supply, power surges or dips, and/or

excessive switching; fatigue failure or similar phenomena resulting from induced vibrations, harmonic oscillation or resonance associated with

movement of air currents around the product; animal or insect activity; fault or negligence of the purchaser of the products, any end user of the

products and/or any third parties not engaged by us, improper or unauthorized use, installation, handling, storage, alteration, maintenance or

service, including failure to abide by any product classifications or certifications, or failure to comply with any applicable standards, codes,

recommendations, product specification sheets, use of products with products, processes or materials supplied by the purchaser of the products,

any end user or third parties, or any other occurrences beyond our reasonable control. In addition, We shall have no responsibility under this

Warranty for any substantial deterioration in the product finish that is caused by failure to clean, inspect or maintain the finish of the products.

During the Warranty Period some staining, chalking or fading may occur. This is normal aging of the finish and is not a manufacturing defect;

therefore it is not covered by this Warranty. Neither polycarbonate nor acrylic material used in the products is warranted against yellowing, as

yellowing may naturally occur over time due to normal aging. If the products are used on existing foundations, anchorages or structures, the

purchaser of the Products and/or any end user is solely responsible for the structural integrity of such existing foundations, anchorages or

structures and all consequences arising from their use.

Adequate records (as determined by us in its sole discretion) of operating history, maintenance, and/or testing must be kept by the end user and

provided to us upon request to substantiate that the products have failed to comply with the terms of this Warranty. The products are not

warranted against costs that may be incurred in connection with changes or modifications to the Products required to accommodate site

conditions and/or faulty building construction or design. In addition, the products are not warranted against cost resulting from installation of

third party components, failures of third party supplied components, or failures of our supplied products caused by third party supplied

components. This Warranty is not applicable to any product(s) which are not installed and operated in accordance with the current edition of The

National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL), or the standards for the American National Standards

Institute (ANSI), and with our instructions and guidelines for the product. THIS WARRANTY IS VOID WITH RESPECT TO ANY PRODUCT IF THE

PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT WAS DESIGNED OR IF ANY REPAIRS OR ALTERATIONS ARE MADE BY ANY PERSON NOT

AUTHORIZED BY OUR IN WRITING.

Except as otherwise set forth herein, We do not warrant ballasts, battery packs, lamps, photocells, occupancy sensors, low voltage indicators, fuses,

surge suppressors, surge protection devices, high intensity discharge (“HID”) components and other third party devices that are not manufactured

by us, which are covered by the applicable third party manufacturer warranty (if any). Such third party manufacturer shall be solely responsible for

the costs related to any claims associated with any such devices. Warping of wooden or plastic blades is not covered by this Warranty. Metal

finishes on Homestyle brand outdoor products are not covered by this Warranty.

Remedy: If the product(s) fail to comply with the terms of this Warranty and the end user (and the purchaser of the product(s) if different from

the end user) has fully complied with all of the obligations under this Warranty and the Terms and Conditions of Sale for us including, without

limitation, payment in full in respect of the products, We are, at its sole option, will repair or replace the product(s) with the same or a

functionally equivalent product(s) or component part(s). Specifically, We will repair the product, replace with a similar or like product (as

determined by us in its sole discretion), or issue a credit to the purchaser which may be used for our future product purchases. (The amount of

such credit shall be calculated by us at its sole discretion). We reserves the right to use new, reconditioned, refurbished, repaired or

remanufactured products or parts in the repair or replacement of any

Summary of content (2 pages)

PAGE 1
LIMITED WARRANTY Limited Warranty (“Warranty”): Subject to the exclusions set forth below, We warrant that all of our products will be free from defects in material and workmanship which cause the products to fail to operate in accordance with the specifications set forth in the documentation published or provided with the Products (the “Specifications”) for a period of one (1) year from the date of shipment (“Non-LED Warranty Period”) and all our light emitting diode (“LED”) Products, will be free from def
PAGE 2
Product covered by this Warranty. This Warranty excludes any and all removal or reinstallation costs and expenses including, without limitation, labor and equipment required to remove and/or reinstall original or replacement product(s) or parts, shipping costs to return nonconforming products(s) or any damage that may occur during the return of any product(s) to us.