Installation & Assembly

MADE IN CHINA
Please consult a qualified electrician for hanging fixture and wiring.
CAUTION:Before starting the installation, disconnect the power by
turning off the circuit breaker or by removing the fuse at the fuse box.
Carefully unpack and identify all parts before assembly
Due to inrush current wattage should not exceed
150 Watts of product for a 600 Watt dimmer.
36W AC LED
1. Prior to installation, install the mounting plate on the
junction box with mounting screws (make sure of
engraved letter "OUTWARD" side facing downward).
Drive screws completely to the end of the junction box.
2. Connect supply wires to wires on fixture with wire
nuts. Connect white to white, black to black and copper
wire to copper wire as grounding connection.
3. Completing the installation by pushing the fixture
into the mounting plate.
This fixture is designed to with standard Triac forward
phase dimmer. Dimming levels will vary by dimmer.
CAUTION:120V-277V INPUT,
120V DIMMING ONLY.
Below is a list of recommended dimmers:
· Lutron MACL-153M
· Lutron DVL-153P
· Lutron SCL-153P
· Leviton IPL06-10Z
· Leviton 6674-POW
PRODUCT NAME: LED FLUSH MOUNT