Installation & Assembly
1
Removing the existing fixture
3
Connecting the wires
4
Installing the ceiling fixture
Installation
2
Install Fixture Mounting Screws
TOOLS REQUIRED FOR INSTALLATION
AND ASSEMBLY
(not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
A. Install xture mounting screws (A)
A. Remove the existing xture.
A. Connect the white supply wire to the white xture wire.
B. Connect the black supply wire to the black xture wire.
C. Connect the ground supply wire to the ground xture wire.
D. Use wire nuts to secure all connections.
WARNING: Installation must be performed by a
qualied licensed electrician.
DANGER: Before installation, turn o the main
power at the circuit breaker.
A. Install the xture base onto xture screws and
secure by turning clockwise into slots.
B. Tighten xture housing screws. Do not over tighten.
C. Install the Lens inside the xture and turn clockwise.
Hand tighten only. Do not over tighten.
A
BLACK Supply Wire
BLACK Fixture Wire
WHITE Fixture Wire
WHITE Supply Wire
GROUND Supply Wire
GROUND Fixture Wire
LIMITED WARRANTY
LED Surface Mount Disc Light