Technical data

18

i) Date Alarm (SDA)
You can program a reminder alarm to go off
on a specific date. On this day, an alarm
will go off for about 10 minutes on every
hour starting at 8:00 a.m. until you press
any button.
When the device is switched off and the
date and time appear in the display in alter-
nation:
 Press the button MODE until the date
blinks in alternation with SDA in the
display.
 Press one of the TUNING buttons brie-
fly to set the SDA date by day.
 Hold one of the TUNING buttons pres-
sed to change the SDA date in 10-day
steps.
Once an SDA alarm has been programmed,
you can only deactivate it by repeating the
configuration steps and programming in a
date that is long past.
9. Miscellaneous
 To lock the buttons against accidental
operation, hold the button KEY-LOCK
pressed for 5 seconds until KEY LOCK
appears in the display.
 If you hold down the button again, the
lock is removed.
 Fold out the prop to set the device at
an incline.
KH2025-2026_IB_UK 01.04.2004 11:29 Uhr Seite 18