Technical data

12

b) Loading Saved Stations
If you would like to load a saved station:
 First select the band (reception range).
 Press the button PAGE until the small
window PAGE contains the number for
the block 1...5 from which you would
like to load the station.
 Then press one of the buttons
M0/5 M1/6 M2/7 M3/8 M4/9
until the number of the desired memory
position appears in the second small
window MEM.
Note: These buttons each have two
assignments. Each press switches bet-
ween the two assignments (e.g between
0 and 5).
c) Memory Scanning
If you have saved multiple stations:
 First select the band (reception range).
 Press the button PAGE until the small
window PAGE contains the number for
the block 1...5 in which you would like
to start the scan.
 Then press the button MEMORY
SCAN once briefly. Now all memory
positions are accessed in about 5
second steps.
If no station is saved at a memory position,
only static is heard.
Pressing any button (except for the volume
buttons) ends the memory scan.
KH2025-2026_IB_UK 01.04.2004 11:29 Uhr Seite 12