Technical data

9

6. Receive Mode
As soon as the device is switched on as
described under 5., it is already in receive
mode.
a) Setting the Volume
 Press the buttons ▼ VOLUME ▲ to
adjust the volume.
b) Selecting the Reception Range (Band)
 Select the desired reception range with
the sliding switch:
- USW = Ultra Short Wave
- MW = Medium Wave
- SW = Short Wave
- LW = Long Wave
c) Changing the Medium Wave Rage
The frequency range and tuning intervals of
MW vary by region:
 Set the sliding switch to
- up in the region "USA"
- down in the region "Europe".
d) Searching for Stations
 Press briefly on one of the two TUNING
buttons to search upward or downward
in steps.
 Hold one of the TUNING buttons pres-
sed to start a scan. The device stops as
soon as a sufficiently strong station is
found. Pressing the button again will
continue the scan.
KH2025-2026_IB_UK 01.04.2004 11:29 Uhr Seite 9