Specifications

TM9-2330-384-14&P
2-19. BOTTOMLOADING(PREFERREDMETHOD)(Con't).
(5)
Remove dust cap (1) and connect fuel terminal facility's vapor collection hose to adapter
(2).
(6) Push down and rotate rear inlet cover (4) counterclockwise to open. Connect fuel terminal
facility's loading hose to rear inlet bayonet fitting (3).
2
dill
3
4
WARNING
DO NOT open emergency valve when bottom loading. Automatic shut-off of
fuel flow, controlled byjet level sensor,will not function with emergency valve
open. Failure to follow this warning will result in uncontrolled fuel spillage and
danger of fire and explosion.
(7)
Pull vapor vent control lever
6
7
(6) in cabinet to open vent.
DO NOT pull emergency
5
valve control lever (5).
CAUTION
When bottom loading, pressure must be
controlled so as NOT to exceed 50 psi
(345 kPa) on pressure gage (7). Failure to
follow this caution may cause leaks in
bottom loading system.
(8)
Begin to load fuel.
2
8
2-40
Change1