Specifications

TM 9-2330-384-14&P
WARNING
OPERATION IN COLD
• Extreme cold is hazardous to personnel. Avoid prolonged exposure to cold weather and wear
protective clothing and gloves. Avoid touching metal surfaces with bare skin. Pay attention to first
signs of frostbite. If exposed skin comes in contact with fuel, frostbite can occur suddenly. If
frostbite occurs, immediately seek medical assistance.
WARNING
PREPARATION FOR SHIPMENT
• Explosive vapor level measurements must be taken at specified intervals prior to semitrailer ship
and rail movement. Failure to follow this procedure may result in serious injury or death to
personnel.
•
The M1062 Tank Semitrailer has not been designed for air transportability. Any attempt to transport
the semitrailer by air may result in an accident, causing damage to semitrailer or serious injury or
death to personnel.
WARNING
REFLECTORS AND DATA PLATES
•
DO NOT drill out rivet when replacing a damaged reflector or data plate. Drilling can produce a spark
which may cause an explosion and fire. Failure to follow this warning may result in serious injury or
death to personnel.
WARNING
STENCILING
•
Avoid excessive inhalation of vapors when stenciling. All stenciling procedures must be performed
in a well-ventilated area, A fire extinguisher must be on hand. Failure to follow this warning may
result in injury to personnel.
•
Personnel must wear protective face masks if spraying paint. If face masks are not available, apply
paint with brush only. Personnel must stay clear of work area where spray painting is taking place.
Failure to follow this warning may result in injury to personnel.
f