Specifications

TM 9-2330-384-14&P

Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) (Con't).

ITEM

NO.

B-Before D-During

A-After

W-Weekly

INTERVAL

ITEM TO BE INSPECTED

EQUIPMENT IS

PROCEDURE: Check for and have Repaired, Filled, or

NOT READY/

Adjusted as required.

AVAILABLE IF:

ROADSIDE OF SEMITRAILER (Con't)

Check side clearance and marker light and

reflector for cleanliness and cracks (see

paragraph 1-7, Roadside View). Clean any dirty

light or reflector lens. If cracked or damaged,

notify unit maintenance.

CAUTION

Ensure that front port dust cap (7) is

properly installed. If front port dust

cap is not properly installed, brake in-

terlock system will cause semitrailer

brakes to lock up.

d. Check that piping assembly front port dust

cap (7) and rear inlet cover (8) are latched in

place. Install front port dust cap with notch

alined with brake interlock paddle (10). Ensure

that paddle does not become pushed in.

e. Inspect brake interlock valves (9) and air

lines at piping assembly front port and rear inlet

for looseness or damage.

Brake interlock valve:

and air lines are loose

or damaged.

M-Monthly

2-11