Specifications
TM 9-2330-384-14&P
Section II. MANUFACTURING INSTRUCTIONS (Con't)
G-20. GRABHANDLE AND CONVOY WARNING LIGHT CABLES.
a.
Fabricate from MIL-W-83420, Xs in. diameter 7 X 7 cable.
b.
Cut to 1 ft. 7 in. long to make Part Number VKA8995-2.
c.
Cut to 10 ft. ¾ in. long to make Part Number VKA8995-3.
G-21. GROUND WIRE.
a.
Fabricate from MIL-W-83420,
KS
in. diameter 7 X 7 cable.
b.
Cut to 6 ft. long to make Part Number VKA8995-1.
G-22. JET LEVEL SENSOR TUBING.
a.
Fabricate from TKG5304-1, 1 in. inside diameter X
x
in. wall neoprene tubing.
b.
Cut to 4 ft. long to make Part Number TKG5304-1-1.
G-23. JET LEVEL SENSOR TUBING.
a.
Fabricate from STK40090,
s
in. outside diameter nylon tubing,
b.
Cut to 1 ft. 8 in. long to make Part Number STK40090-11.
c. Cut to 2 ft. 10 in. long to make Part Number STK40090-12.
d.
Cut to 1 ft. 2 in. long to make Part Number STK40090-13.
e.
Cut to 5 ft. long to make Part Number STK40090-14.
f.
Cut to 34 ft. 5 in. long to make Part Number STK40090-15.
g.
Cut to 34 ft. 5 in. long to make Part Number STK40090-16.
G-24. PRECHECK TUBING.
a.
Fabricate from STK40109, ½ in. outside diameter nylon tubing.
b.
Cut to 25 ft. 6 in. long to make Part Number STK40109-7.
C.
Cut to 3 ft. long to make Part Number STK40109-8.
d.
Cut to 5 ft. 1 in. long to make Part Number STK40109-9.
G-8