Specifications

TM 9-2330-384-14&P
Table. UnitPreventiveMaintenanceChecksandServices(PMCS)(Con't).
B-Before D-During A-After
W-Weekly M-Monthly
INTERVAL ITEM TO BE INSPECTED EQUIPMENT IS
ITEM
PROCEDURE: Check for and have Repaired, Filled,
or
NOT READY/
NO.
13 D A
W M Adjusted as required. AVAILABLE IF:
2
FRONT OF SEMITRAILER (Con't)
0
e. Check for tears or cracks in seals (1) of Air coupling seals are
EMERGENCY and SERVICE air couplings. If seals torn, cracked, or
are torn, cracked, ormissing, notify unit maintenance. missing.
0
f.
Inspect front roadside emergency valve remote trip release (3) for looseness or damage. Emergency valve re-
mote trip release is
damaged or missing.
g.
Inspect electrical conduit (2) to ensure that it is
properly supported with clips (5), it is not damaged,
and all connections at voltage control unit (6) are
tight. Notify unit maintenance of any looseness or
damage.
h. Check grounding stud (4), located front roadside, Any damage is found
for looseness or damage. Clean any paint, grease, or
that will prevent proper
dirt on grounding contact surface. If loose or damaged, grounding of semi-
3
4
2
5
3
ROADSIDE OF SEMITRAILER
0
a. Check that roadside fire extinguisher is present,
Fire extinguisher is
properly covered and secured, and fully charged. missing or not fully
charged.
0
b. Check that landing gear ground board is present
and securely stowed (see paragraph 1-7, Roadside
View).
2-10