Specifications
TM9-2330-384-14&P
Table. Unit PreventiveMaintenanceChecksandServices(PMCS).
B-Before D-During A-After W-Weekly
M-Monthly
INTERVAL ITEMTOBEINSPECTED EQUIPMENTIS
I M
PROCEDURE: Check for and have Repaired, Filled, or
NOT READY/
NO.
B D A
W M
Adjusted as required.
AVAILABLE IF:
NOTE
•
Perform these checks, in the order listed, within
designated interval, as you walk around
semitrailer.
•
Perform WEEKLY (W) and BEFORE (B) PMCS
if:
a. You are operating semitrailer but have not
operated it since last weekly (W) check.
b.
You are operating semitrailer for the first time.
OVERALL CHECK FOR FUEL LEAKAGE FROM
TANK, PIPING ASSEMBLY, PRECHECK AND JET
LEVEL SENSOR TUBING.
a. Check for pools or small spots of fuel on ground,
ANY FUEL LEAKS.
which could indicate a fuel leak. Check for leaks in
precheck and jet level sensor tubing (see paragraph
1-15).
b.
Inspect tank and piping assembly for cracks,
Tank or piping
dents or bad welds.
welds.
2
FRONT OF SEMITRAILER
0
a. Check pick-up plate for proper lubrication and
loose mounting bolts (see paragraph 1-7, Curbside
View). If bolts are loose, notify unit maintenance.
0
b. Check upper coupler assembly for proper
Upper coupler
lubrication, looseness of mounting bolts, any bowed
sembly is bowed or
condition, and cracks (see paragraph 1-7, Roadside
cracked.
View). If bolts are loose, notify unit maintenance.
0
c. Check front clearance and marker lights and
reflector for cleanliness and cracks (see paragraph 1-
7, FRONT View). Clean any dirty light or reflector lens.
If cracked or damaged, notify unit maintenance.
0
d. Check hazardous materials placards for broken
or missing clips. Make sure placards move freely.
Change1 2-9