Specifications

TM 9-2330-384-14&P
5-5. GRABHANDLE AND CONVOY WARNING LIGHT CABLE ASSEMBLY REPAIR.
THIS TASK COVERS
a. Grabhandle Cable Assembly Repair
b.
Convoy Warning Light Cable Assembly
Repair
Equipment Conditions:
Ref
Conditions
4-68 Tank purged.
References: TM 9-237
Tools:
l Tool kit,
l Tool kit,
general mechanic’s
welder’s
l wire cutter
a. GRABHANDLE CABLE ASSEMBLY REPAIR
(1) Remove two lockpins (3) from
grabhandle (2) and mounting
brackets (1).
(2)
Cut cable (5) and remove. Retain
two lockpins (3) if not damaged.
(3)
Cut a length of new cable (5) 19
in. (48.3 cm) long.
(4)
Make two loops at ends of cable
(5) and install two sleeves (4).
NOTE
Length of cable (5) and lockpin (3)
assembly should be 31 in. (78.7
cm).
(5)
Install two lockpins (3) through loops in cable (5). Pull loops tight. Use vise grips to crimp
sleeves (4).
(6)
Tack weld clip (6) to overturn rail to securely retain cable (5). Cable should not slip through
clip.
(7)
Install two lockpins (3) through grabhandle (2) and mounting bracket (1).
5-14