Specifications

TM 9-2330-384-14&P
5-3. BRAKE SHOE REPAIR.
THIS TASK COVERS
a.
Removal of Brake Shoe Linings
C.
Installation of Brake Shoe Linings
b.
Cleaning and Inspection
INITIAL SETUP
Equipment Conditions:
Ref Conditions
4-35 Brake shoes removed.
Tools:
l Tool kit, general mechanic’s
l C-clamps
l Drill & No. 29 drill bit
l Rivet gun
Materials/Parts:
l Forty-eight rivets
l Dry cleaning solvent (ltem 10, Appendix E)
General Safety Instructions:
l Dry cleaning solvent is flammable and must
not be used near open flame. Use only in a
well-ventilated area.
• Compressed air used for drying purposes
must not exceed 30 psi (207 kPa).
a. REMOVAL OF BRAKE SHOE LININGS
(1)
Drill out 24 rivets (3) and remove
brake lining cam (2) and brake
lining anchor (1) from brake
shoe. Discard rivets.
(2) Repeat step 1 to remove brake
shoe linings from other brake
shoe.
5-7