Specifications

TM 9-2330-384-14&P
4-82. EMERGENCY VALVE MAINTENANCE.
a.
Removal
d. Assembly
b. Disassembly
e.
Installation
c.
Cleaning and inspection
Equipment Conditions:
Ref Conditions
4-68 Tank purged.
4-76 Cable and tubing disconnected from
emergency valve.
Materials/Parts:
l One retaining ring
l One seal
l Two gaskets
l Eight preformed packings
l Twenty starwashers
l Dry cleaning solvent (Item 10,
Appendix E)
l Grease
(Item 12, Appendix E)
l Tag marker
(Item 21, Appendix E)
l Antiseize tape
(Item 22, Appendix E)
Personnel Required: Two
Tools:
l Tool kit, general mechanic’s
l Pipe wrench
l Vise
General Safety Instructions:
l Dry cleaning solvent is flammable and must
not be used near open flame. Use only in a
well-ventilated area.
l Compressed air used for cleaning or drying
purposes must not exceed 30 psi
(207 kPa).
l Valve is spring loaded. Use extreme
caution when handling it.
a. REMOVAL
NOTE
ll Emergency valve is located directly above rear air reservoir under rear of
semitrailer.
l Tag or mark jet level sensor tubing and fittings to ensure proper installa-
tion.
4-267