Specifications

TM 9-2330-384-14&P
4-76.
EMERGENCY VALVE AND VAPOR VENT CABLES AND TUBING MAINTENANCE
(Con't).
CAUTION
l l Use caution when securing tubing
(5) under clips (2). Improper han-
dling of clips will cause them to
break.
l l If two or more consecutive clips
(2) are missing or damaged, tub-
ing (5) will not be adequately sup-
ported.
(5)
(6)
(7)
(8)
(9)
Bend other length of tubing (5) as
required. Install through grom-
mets (8) and secure under clips
(2) in same manner as tubing at
cabinet (7) end. If two or more
consecutive clips are missing or
damaged, notify direct support
maintenance.
Connect tubing (5) at emergency
valve (6), vapor vent (3), or re-
mote trip-release (1) end.
Cut tubing (5), as required, at
point of installation of grease fit-
ting (4).
Connect tubing (5) lengths with
grease fitting (4) and tighten two
grease fitting nuts.
Install cable (11) through tubing
(5). Connect cable at each end.
(10) Adjust length of cable (11) (see
paragraph 4-74).
4-249