Specifications

TM 9-2330-384-14&P

4-69. DATA PLATE REPLACEMENT (Con't).

REMOVAL

WARNING

DO NOT drill out rivets (4) if removing a data plate (3) from inside cabinet

(2). Cabinet is made of steel. Drilling a rivet from steel can produce a spark

which may cause an explosion and fire. Failure to follow this warning may

result in serious injury or death to personnel.

(1)

If removing a data plate (3) inside cabinet (2) use side cutters to remove four rivets (4). If

removing a data plate from aluminum framerail (1) at upper coupler assembly, use a hand

drill to drill out four rivets. Discard rivets.

(2) Replace data plate (3).

b. INSTALLATION

NOTE

For location of all data plates (3), refer to paragraph 1-9.

(1) Position data plate (3).

NOTE

Rivets (4) used on data plates (3) inside cabinet (2) are installed with wash-

ers (5).

(2)

Use a rivet gun to install data plate (3) with four new rivets (4).

4-214