Specifications

TM 9-2330-384-14&P
4-58. FENDER AND CENTER FENDER BRACKET REPLACEMENT (Con't).
a. REMOVAL
(1) Remove eight locknuts (9), washers (8), and screws (7) from top of fender (2). Discard
locknuts.
(2) Remove top four locknuts (5), washers (6), and screws (4) securing center fender bracket
(10) to semitrailer. Loosen bottom two locknuts.
(3) Swing center fender bracket (10) down clear of fender (2).
(4) At front and rear fender brackets (1), remove six screws (13), washers (12), and locknuts
(11). Remove fender (2). Discard locknuts.
(5)
If center fender bracket (10) is damaged, remove two bottom locknuts (5), washers (6), and
screws (3). Remove center fender bracket. Discard locknuts.
(6)
Replace center fender bracket (10).
8
5 6
5
3
2
4
8
10
13
12
b. INSTALLATION
(1)
If removed, loosely install center fender bracket (10) with two bottom screws (3), washers
(6), and new locknuts (5). Let center fender bracket hang down.
(2)
Loosely install fender (2) to front and rear fender brackets (1) with six screws (13), washers
(12), and new locknuts (11).
(3)
Swing center tender bracket (10) up into position against fender (2). Alining bolt holes,
loosely install eight screws (7), washers (8), and new locknuts (9).
4.182