Specifications

TM 9-2330-384-14&P
4-51. PICK-UP PLATE REPLACEMENT.
THIS TASK COVERS
a.
Removal
c.
Installation
b.
Cleaning
INITIAL SETUP
Materials/Parts:
Six locknuts
Personnel Required: Two
Dry cleaning solvent(ltem 10, Appendix E)
Grease
(Item 12, Appendix E)
Mylar tape
(Item 24, Appendix E)
Tools:
General Safety Instructions:
Pick-up plate is heavy and awkward to
handle. Use caution, provide adequate
support,
and use assistance during
removal and installation.
Tool kit, general mechanic’s
Torque wrench
Dry cleaning solvent is flammable and must
not be used near open flame. Use only in a
well-ventilated area.
a.
REMOVAL
Pick-up plate (1) is heavy and awkward to handle. Use caution, provide ade-
quate support, and use assistance during removal. Failure to follow this
warning may result in serious injury to personnel.
Remove six locknuts (4), washers (3),
and bolts (2). Remove pick-up plate (1)
from front crossmember and siderails.
Discard locknuts.
b.
CLEANING
WARNING
(1)
Remove all traces of old mylar tape
from mounting surfaces of pick-up
plate (1) to front crossmember
and siderails.
4-159