Specifications

TM 9-2330-384-14&P
4-46. WHEEL, DRUM, AND WHEEL BEARING MAINTENANCE.
THIS TASK COVERS
a.
b.
Removal
c.
Installation
Cleaning and inspection
INITIAL SETUP
Equipment Conditions:
Ref Conditions
4-34 Brakes adjusted.
4-45 Tires removed.
Tools:
Tool kit, general mechanic’s
Drain pan
Torque wrench
4% in. wheel bearing adjusting nut wrench,
8 pt.
47A in. wheel bearing adjusting nut wrench,
6 pt.
Personnel Required: Two
References:
TM 9-214
Materials/Parts:
One cotter pin
One oil seal
One performed packing
Five locknuts
Abrasive cloth
(item 5,
Dry cleaning solvent
Appendix E)
Lubricating oil (Item 15,
Tag marker
(Item 21,
General Safety instructions:
Appendix E)
(item 10,
Appendix E)
Appendix E)
Dry cleaning solvent is flammable and must
not be used near open flame. Use only in a
well-ventilated area.
If any wheel stud is damaged and needs
replacement, all wheel studs MUST be re-
placed.
Wheel and drum assembly is heavy and
awkward to handle. Use caution, provide
adequate support, and use assistance dur-
ing removal and installation.
4-147