Specifications

TM 9-2330-384-14&P

4-39. AIR LINES AND FITTINGS REPLACEMENT (Con't).

3/8 in. outside diameter clip

3/8 in. outside diameter EMERGENCY air line

7/16 in. inside diameter grommet

8. 11/16 in. inside diameter grommet

9. 1/2 in. outside diameter SERVICE air line

10. 1/2 in. outside diameter clip

11. 90 degree elbow

12. Relay quick release valve

16. Ratio relay valve

17. 1/2 in. hose assemblies

18. Brake chamber

19. Tie-strap

20. Tee

21. Plug

22. Hose separator

CAUTION

• Use caution when removing or installing air lines (4 or 9) at clips (2 or

10). Clips should be lifted gently and only enough to release air lines.

When securing air lines under clips, a soft-faced hammer should be

used to tap clips back into place. Improper handling of clips will cause

them to break.

If two or more consecutive clips (2 or 10) are missing or damaged, air

lines (4 or 9) will not be adequately supported. Damage to air lines may

result.

(3)

If two or more consecutive clips (2 or 10) are damaged or missing, notify direct support

maintenance.

4-117