Specifications

TM 9-2330-384-14&P
4-37. SLACK ADJUSTER REPLACEMENT.
THIS TASK COVERS
a.
b.
Removal
C.
Installation
Inspection
INITIAL SETUP
Equipment Conditions:
Ref Conditions
4-33 Brake chamber spring caged.
Tools:
Materials/Parts:
l One retaining ring
l Two cotter pins
l Grease
(Item 12, Appendix E)
l Tool kit, general mechanic’s
l Floor jack
l Jackstands
l Retaining ring pliers
a. REMOVAL
(1)
Remove two cotter pins (2) and discard. Remove two clevis pins (3).
(2)
Turn adjusting nut (9) on slack adjuster (5) clockwise to gain free play.
(3)
Remove retaining ring (7) and washer (8) at slack adjuster (5). Remove slack adjuster. Dis-
card retaining ring.
4-108