Specifications

TM 9-2330-384-14&P
4-19. BLACKOUT LIGHT MAINTENANCE.
a.
b.
Removal
c.
Connector Repair
Installation
Equipment Conditions:
Materials/Parts:
Ref
Conditions
Two starwashers
2-14
Intervehicular electrical cable discon-
nected from semitrailer.
Corrosion preventive compound (Item 7,
Appendix E)
Tools:
Shop equipment, automotive maintenance
and repair,
organizational maintenance,
common no. 1
Tag marker
(Item 21, Appendix E)
General Safety Instructions:
When performing electrical maintenance,
ALWAYS disconnect inter-vehicular electri-
cal cable from semitrailer.
a. REMOVAL
WARNING
When performing electrical mainte-
nance, ALWAYS disconnect inter-
vehicular electrical cable from semi-
trailer. Failure to follow this warning
may create a spark and explosion, re-
sulting in serious injury or death to
personnel.
NOTE
Tag wires for installation if other
lights at light box are being removed.
(1) Remove four screws (3) and pull
turn signal/taillight (2) from light
box (1) enough to gain access to
blackout light (4) mounting hard-
ware inside light box.
4-44