Specifications

TM 9-2330-384-14&P

LANDINGGEAR- CURBSIDE

LANDINGGEAR- ROADSIDE

GAA

NOTES:

PICK-UP PLATE, UPPER COUPLER hubcapplug. Add

1 1/2 pintsof lubricatingoil or

ASSEMBLY: Wipesurfacesclean,thenapplya

until even with fill line on clear hubcap. Install

liberal coat of GAA.

plug.

2. LANDING GEAR LEGS: Fully extend landing 4. OIL CAN POINTS: Semiannually, or as required, use

gear legs and apply grease to lower portion.

OE/HDO-30 to lubricate cabinet and stowage tube

Apply grease to all grease fittings.

door hinges, landing gear handcrank swivel, emer-

gency valve and vapor vent control levers, two emer-

WHEEL BEARINGS: Place a suitable container

gency valve remote trip-releases, vapor vent linkage,

under hubcap. Remove hubcap and allow all

and manhole fill cover hinge.

lubricating oil to drain. Install hubcap without

Change1 3-5