Specifications

TM9-2330-384-14&P
3-2. SPECIFICLUBRICATIONINSTRUCTIONS(Cont'd).
WARNING
DrycleaningsolventP-D-680istoxicandflammable.Alwayswearprotective
goggles,faceshield,andglovesanduseonlyina well-ventilatedarea.Avoid
contactwithskin,eyes,andclothesandDONOTbreathevapors. DO NOTuse
nearopenflameor excessiveheat. Thesolvent'sflashpointis 100*F-138*F
(38*C-59*C).Ifyou becomedizzywhileusingcleaningsolvent,immediately
getfreshairandmedicalhelp.Ifsolventcontactseyes,immediatelywashyour
eyeswithwaterandgetmedicalaid.
b.
Use dry cleaning solvent (item 10, Appendix E) to clean grease fittings, lubrication points, and
surrounding areas before lubrication.
c.
When lubricating at a grease fitting, apply enough grease to purge old grease from the lubricated
area. When old grease oozes from grease fitting, purging and relubrication are adequate.
WARNING
Wipe clean excessive lubricant in the area of brake shoe linings to avoid
grease soaking the linings. Replace grease soaked brake shoe linings. Failure
to follow this warning may cause brakes to malfunction, resulting in serious
injury or death to personnel.
d.
After lubrication, wipe clean excess oil or grease to prevent accumulation of foreign matter.
e.
Refer to FM 9-207 for instructions on lubrication in cold weather.
f.
After operation in dusty or sandy conditions, clean and inspect all points of lubrication for fouled
lubricants.
Change lubricants as required.
- KEY -
LUBRICANTS
EXPECTED TEMPERATURES
INTERVALS
+1 25*F (52C) to -25'F (-32'C)
OE/HDO-30 Oil, Lubricating, Engine
M = Monthly
MIL-L-2104
S = Semiannually
GAA
Grease, Automotive and Artillery
ALLTEMPERATURES
MIL-G-10924
(For Arctic Operation,
(every 6
Refer to FM 9-207)
months)
GO 80/90
Lubricating Oil, Gear, Multipurpose
A = Annually
MIL-L-2105
(every 12
MAG-1

Grease, Ball and Roller Bearing
months)
(73219) 18901
3-2 Change1