Specifications

TM9-2330-384-14&P
CHAPTER3
OPERATOR MAINTENANCE
Section 1. LUBRICATION INSTRUCTIONS
Paragraph
Page
Number
Title
Number
3-1 General
...............................................................................................................
3-1
3-2
Specific Lubrication Instructions ..........................................................................
3-1
3-1. GENERAL.
NOTE
These lubrication Instructions are MANDATORY.
a. The M1062 7500 Gallon FuelTank Semitrailer must receive lubrication with approved lubricants
at recommended intervals in order to be mission ready at all times.
b. The KEY lists lubricants to be used in all temperature ranges. Tabular listings show all lubrication
points, name the item to be lubricated, the required lubricant, the recommended interval, and the estimated
man-hours needed to perform the service. Notes at the end of the tabular listing provide specific lubrication
instructions.
c. Broken arrow shafts
indicate lubrication points on both sides of the semitrailer.
d.
Level of maintenance authorized to perform lubrication is indicated in parentheses on last line of
ITEM NAME entry.
e.
Recommended intervals are based on normal conditions of operation, temperature, and
humidity. When operating under extreme conditions, lubricants should always be changed more frequently.
When in doubt, notify your supervisor.
3-2. SPECIFIC LUBRICATION INSTRUCTIONS.
a.
Maintain a record of lubrication performed and report any problems noted during lubrication.
Refer to DA Pam 738-750 for maintenance forms and procedures to record and report any findings.
3-1