User Manual

Please read these instructions and the Product

Manual completely. Take some time to set up Ebb

in your bedroom prior to first use.

For support you can contact Ebb Customer Care

at (800) 381-1145.

Set Up Connect Headband

Unpack the following components to get started.

Place the bedside controller on a hard, flat

surface at the height of your pillow and near

a wall outlet.

1. Insert headband connector to

back of bedside controller until

you feel it click.

2. Tug firmly on the headband

connector to make sure

it is inserted correctly.

Bedside Controller

Headband

Fluid Cartridge Power Supply

1 2

Quick Start Guide

PAGE 1
Quick Start Guide Please read these instructions and the Product Manual completely. Take some time to set up Ebb in your bedroom prior to first use. For support you can contact Ebb Customer Care at (800) 381-1145. Unpack the following components to get started. Bedside Controller 1 Set Up Headband Place the bedside controller on a hard, flat surface at the height of your pillow and near a wall outlet. Fluid Cartridge Power Supply 2 Connect Headband 1.
PAGE 2
3 Insert Fluid Cartridge 1. R emove orange cap from fluid cartridge before inserting. 2. Open Lid. 3. I nsert fluid cartridge and hold down. 4. Hold down and turn to lock position. 5. K nob is in locked position. Wait 30 seconds before using bedside controller. 4 Connect the Power Supply Note: The connection is intentionally snug. The power supply is installed correctly when you can no longer see the metal portion of the connector. 1. P lug the end of the p ower cord into the power s upply.
PAGE 3
7 Turn on Gentlewake 8 Turning System On and Off 2. P ress “Gentlewake on/off” button. A sun icon will appear when the Gentlewake feature is on. 8:30 1. O pen lid to access clock buttons. am 3. The Gentlewake feature turns off the cooling therapy 30 minutes before the wake up time you set. 9 Select Temperature When the device is on, turn the dial to the desired temperature setting. P1 (coldest) - P10 (warmest). Cooler Push and hold dial to turn the device “ON” or “OFF”.