User Manual

12 13
CAUTION:
Use only fluid cartridges provided by Ebb Therapeutics to assure proper performance. Make sure the fluid cartridge is in the bedside controller
before initial use.
3
Insert fluid cartridge
and hold down.
Hold down and turn to
lock position.
Knob is in locked position.
Wait 30 seconds before
using bedside controller.
Open lid.
Remove orange cap from fluid
cartridge before inserting.
WARNING:
Do not use Ebb if the package or any part is damaged. Contact Ebb Customer Care Team.
!
Connect Power Supply
4
Plug the end of the power
cord into the power supply.
The flat surface with the arrow
should face up on the power
cord when plugging in the
bedside controller.
Plug the power supply fully into
the connector on the back of
the bedside controller.
Note: The connection is
intentionally snug. The power
supply is installed correctly
when you can no longer see the
metal portion of the connector.
Plug into an electrical outlet
that is not controlled
by a wall switch.
Insert Fluid Cartridge
3
Remove orange cap from fluid
cartridge before inserting.
Insert Fluid Cartridge