Product Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
PROVEN PERFORMANCE
The EIPL HGR1500 produces drier air than a standard refrigeration type
dehumidifier, typically down to 20% RH. This is only possible with a secondary pre-
cooling method, in the HGR1500 case, an Air to Air Heat Exchange. The refrigeration
system of the HGR1500 is fine tuned to ensure the leaving air is at it’s lowest
possible relative humidity, thereby ensuring the maximum drying performance, for
lowest running costs.
The high capacity backward curved fan will maximize air delivery over long
distances. Whenever there is a need for fast dependable, energy-efficient drying,
EIPL can provide the answer. The high efficiency rotary compressor ensures the
maximum extraction with the lowest running costs.
THE PROBLEM
EIPL is a recognized world wide supplier of flood restoration drying equipment. We offer a variety of
dehumidifiers and air movers to remove water and assist with drying areas after water damage. Following a
flood, whether it is in your basement or office, it’s vitally important to restore the damaged area to good order
as soon as possible to protect your health from microorganisms, mold and bacteria that may grow and
ultimately prevent further damage. Whether it is a flash flood, hurricane, heavy rains or water main break,
EIPL has the equipment to handle the harshest environments and assist with proper restoration.
THE DEHUMIDIFIER
EIPL dehumidifiers are effective solutions to environmental control problems. The HGR1500
dehumidifier, with it’s two stage cooling process and temperature sensitive defrost control, ensures
optimum performance throughout the unit’s full operating temperature range.
Moisture is removed from the air through an efficient refrigeration process. The fan draws the
moist air through and “Air to Air” heat exchange, where the incoming
air is pre-cooled. The air is then drawn through the evaporator coil
which further cools the air below it’s dew point. Moisture forms on
the evaporator coil and is collected in the condensate tray. The
cooled air then passes through the hot condenser coil where it
is reheated using the same energy removed during the cooling
phase, plus the additional heat generated by the compressor.
The air is, therefore, discharged from the dehumidifier at a slightly
higher temperature with a lower absolute humidity than that
which entered. Continuous circulation of air through the
dehumidifier gradually reduces the relative humidity
within the area.
HOW THE HGR DEHUMIDIFIER WORKS
APPLICATIONS
MODEL NO.
Flood & Restoration
Roof Leaks
Basements / Cellars
Rental Yards
Vehicle Storage
Hotels / Guest Houses
Stores
Home Systems
Laboratories
Offices
Humid air is drawn into the dehumidifier and passes through an
“Air to Air“ Heat Exhange.
This process precools / drys the air, before being passed over
the Evaporator coil, where any moisture present will be removed.
This cool dry air then passes back through the Air to Air Heat
Exhange, in the opposite direction, providing the cooling for the
incoming air.
After passing over the Condenser Coil, which reheats the air, the
Warm “Super Dry Air” leaves the dehumidifier.