User Guide
Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: (757) 873-6800 Fax: (757) 873-3632 www.ebacusa.com
PROVEN PERFORMANCE
Under the operating conditions of 80°F and 60% Relative
Humidity (AHAM standard, baseline used to compare
the performance of industrial dehumidifiers), the CD30 /
CD30E units will remove more than 17 pints of harmful
water vapor each day, additionally, nearly 4 gallons
per day can be efficiently removed in an extreme
environment.
The CD30 / CD30E units are definitely not “another
pretty face” but tough, self sufficient performers
THE DEHUMIDIFIER
EIPL dehumidifiers are effective solutions to environmental control problems. The CD ranges of units are high
capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the
refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air
below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray,
which is equipped with an internal condensate pump for easy removal of collected moisture.
The cooled air then passes through the hot condenser coil where it is reheated using
the same energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly
higher temperature with a lower absolute humidity than that which entered. Continuous
circulation of air through the dehumidifier gradually reduces the relative humidity
within the area. Because the CD ranges of units are equipped with an internal
humidistat, they automatically switch on and off to save energy and expense by
maintaining the desired level of humidity with intermittent operation.
The additional features of the CD30E make the unit the ideal choice for
installations where remote monitoring is required. The alarm humidistat
can be adjusted and preset during the installation process and will
provide means of identifying a high humidity condition. This
unit is also supplied complete with a wall mount
bracket and installation kit.
THE PROBLEM
Excess humidity in your crawl space, warehouse, office
factory or shop results in corrosion, mold growth and rotting.
Enormous costs are incurred every year through damage to
inventory and through inflated building maintenance costs as
a result of dampness. Even if your building seems dry during
the day, at night when the temperature falls the humidity rises
and the condensation process begins. The compact physical
size, and high performance, makes the CD30 family the ideal
choice for home owners with crawl spaces.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CD30 CD30E
Model No. 1133500 1139550
Crawl Spaces
-
Warehouse
Basements
Factories
Water Damage Restoration
-
Sports Halls
-
Storage Areas
Laboratories
Applications CD30 CD30E
Model No. 1133500 1139550
Oil Rigs
Agriculture
-
Kitchens
-
Pumping Stations
Hotel / Motel
-
Stadiums
Ships / Barges
-