Instructions / Assembly

User Instructions

Tree Set-up

• Assemble Eazy Treezy per instructions above.

• Place Eazy Treezy on flat and level ground or flooring.

*If greater security is desired mount Eazy Treezy to a piece of plywood at least

24 in. x 24 in. with 5 wood screws (not included) through the 5 screw holes in

Base.

• Lift tree above Eazy Treezy and rest on top angled surface of all five Jaws.

• While resting on Jaws, tilt tree so that it is straight and vertical as desired.

• Push tree straight down.

• Add water into check and fill spout, check water level daily and refill as needed.

Tree Removal

• Step or place foot on upper flat lip of Eazy Treezy Base.

• Securely grab trunk of tree.

• Lift tree straight up and out.

Tips

• If tree has gone in crooked, or not to your liking, either remove and reinstall OR

push down on one or two Jaws on the side which you would like your tree to

lean more toward, tilt tree into desired position, then release Jaws.

• To keep your tree fresh and green as long as possible 1) place tree into water

within two hours of getting a fresh cut 2) do not allow the water level in the

Eazy Treezy drop below the bottom of the tree trunk 3) Keep your tree away

from heater vents or fireplaces.

• If the tree is challenging to remove, rock the tree side to side to help unseat the

trunk from the spikes in the Base, then lift out.