Instructions / Assembly

Contents

A. Eazy Treezy Base (x1)

B. Jaw (x5)

C. Bridge (x1)

D. Tension Band (x2)

Assembly Instructions

• Insert each of the 5 Jaws (B) into a slot in the Base (A)

• Loop one Tension Band (D) around the lower hooks on all 5 of the Jaws (B)

• Loop the other tension band (D) around the upper hooks on all 5 of the Jaws (B)

• Insert Bridge (C) into Base (A)

PAGE 1
Contents A. B. C. D.
PAGE 2
User Instructions Tree Set-up • • • • • • Assemble Eazy Treezy per instructions above. Place Eazy Treezy on flat and level ground or flooring. *If greater security is desired mount Eazy Treezy to a piece of plywood at least 24 in. x 24 in. with 5 wood screws (not included) through the 5 screw holes in Base. Lift tree above Eazy Treezy and rest on top angled surface of all five Jaws. While resting on Jaws, tilt tree so that it is straight and vertical as desired. Push tree straight down.