Customer Service: hi@eazeechairs.com Website: www.eazeechairs.
COMPONENTS HARDWARE/TOOLS 22 2 P O 55 40 10
10 Insert 5 Wheels to the holes on each prong of chair Base. C B A Pull out the footrest. A 11 Remove 2 screws from the footrest before installing. I Slide the footrest base through the support bracket, then tighten the 2 screws. D I Use the footrest by rotating it clockwise.
P P N M N M P N M P N M E Press the button to adjust the armrest. D F D E 9 O L K Armrests, 270 degrees. D F F G C Armrest front and rear adjustment.
10 Up and down adjustment of headrest . The screws are ready on the headrest. The screws should first be removed, then tightened after the headrest is in place. H G Self-adaptive adjustments of headrest. Lumbar support can be adjusted up and down.
Flip the left inner handle for seat depth adjustments. Flip the right inner handle for seat height adjustments. Rotate the right outer knob for adaptive tilt-tension adjustments. Clockwise rotationincreases adaptive tilt-tension; anti-clockwise rotation . decreases adaptive tilt-tension Only adjustable when the backrest is at upright position. 3 12 4 Flip the left outer handle for backrest tilt locking.
