Product Manual

WEIGHT DISTRIBUTION HITCHES
DEALER / SUPPLIER
WEIGHT DISTRIBUTION HITCH AVAILABLE SHANKS
SWAY CONTROL BAR AND LUBRICANT
The Eaz Lift screw on sway controls minimize the sway
caused from passing trucks and sudden gusts of wind. Its
double friction disc brake principle enables it to constantly
reduce the sway and hence improves vehicle handling.
Note: Vehicles over 24’ may require two sway controls.
350-05800 EAZ LIFT SCREW-ON SWAY CONTROL -
DRIVERS SIDE/RIGHT HAND MOUNTED
350-05810 EAZ LIFT SCREW-ON SWAY CONTROL -
PASSENGER SIDE/LEFT HAND MOUNTED
The EazLift Adjustable Ball Mount offers a huge
range tow ball height adjustment, up to 680mm
across EazLift’s range of compatible shanks.
350-05730 Adjustable Ball Mount
350-05720
CAN BE USED IN HIGH OR LOW POSITION
350-05724
CAN BE USED IN HIGH OR LOW POSITION
350-05728
TO BE USED IN LOW POSITION ONLY
HI-LOW SHANK
EXTRA LOW SHANKS
EXTRA HI-LOW SHANK
Used in either the high or low position to match the tow ball
mount to any coupler height. Long hi-low shanks provide
the extra length sometimes needed to obtain clearance
from bumper interference.
HI-LOW SHANK
Fits 2” x 2” receiver
Low mounted: + 45mm lift / + 135mm lift
High mounted: + 135mm lift / + 225mm lift
EXTRA HI-LOW SHANK
Fits 2” x 2” receiver
Low mounted: - 50mm lift / + 40mm lift
High mounted: + 225mm lift / + 315mm lift
EXTRA LOW SHANK
Low mounted:- 50mm lift / - 140mm lift
EAZ LIFT 600 SERIES (272KG) WEIGHT DISTRIBUTION HITCH
No Shank
350-05600
EAZ LIFT 800 SERIES (363KG) WEIGHT DISTRIBUTION HITCH
No Shank
350-05610
AUSTRALIA: www.coastrv.com.au NEW ZEALAND: www.coastrv.co.nz
Email: NSW: [e-mail]
QLD: [e-mail] VIC: [e-mail]
WA: [e-mail] NZ: [e-mail]
TECHNICAL: [e-mail]
PROUDLY DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY