Specifications

Page 8 of 89
2.4 Network Menu
Connect - Poll network for all available devices.
Refresh Network - Refreshes network connection on all available devices
Disconnect - Discontinue network polling and disconnect from any connected network
devices.
2.5 Options Menu
Temperature and Humidity - Set the Temperature and Humidity of your venue.
Changing these values will modify air absorption characteristics, and therefore
resultant SPL on venue surfaces. These parameters are also used in calculating air loss
compensation processing for products that support this feature.
Without Air Absorption - Toggle between an SPL calculation with and without air
absorption based on the user defined temperature and humidity values.
Auto-Adjust SPL Range - Automatically determines the difference between highest
and lowest SPL within a given file, and sets limits of SPL color scale to these values.
SPL Interpolation - Affects how quickly an SPL map is created. Available settings are:
Fastest SPL mapping is rendered in the shortest amount of time. To accomplish
this, the resolution (detail) of audience area mapping is decreased.
Normal Standard SPL resolution is used. This offers the best balance of
resolution and calculation speed.
Best SPL mapping is divided into multiple steps, beginning at low resolution
and increasing as more time elapses. This provides the user with initial
data in the shortest amount of time, but also provides higher-resolution
information if given more time.
Side View Contour Lines - Defines side view contour line SPL increments. In the side
view, contour lines are positive (increasing) increments starting with the highest SPL
value on the venue surface. Selectable in 1, 2 and 3 dB increments.
Top View Contour Lines - Defines top view contour line SPL increments. IN the top
view, contour lines are negative (decreasing) increments starting with the highest SPL
value on the venue surface. Selectable in 1, 2 and 3 dB increments.
Design Factor - Selects the design factor as it relates to the working load limits of a
design. Resolution uses this selection to alert the user when stresses on loudspeaker
rigging components have exceeded the selected design factor.