Specifications

Page 75 of 89
Step 2
The following dialog will be displayed:
This indicates that the entire Anya system has muted. The user should verify this by
applying the stimulus source (noise) to the system. No noise should be audible from
the system. This confirms communication with all modules. Click “OK”.
Step 3
The following dialog will be displayed:
This indicates that a single cell from one column has been unmuted. The user should
then increase the noise output level (via the audio interface, mixer, or both) until a
suitable balance between measurement and reference channels is achieved. The
criteria for trilateration to function correctly are the same as for achieving a good
transfer function measurement. For more help on this, please consult the Smaart 7
Help File.
Once “OK” is selected, Resolution will begin the Find Me routine. The stimulus signal
will continue to be audible, and will move between several devices in both arrays. Do
not modify any system parameters while this process is underway.
If successful, a virtual microphone will be placed within the model at the coordinate of
the actual microphone. This microphone will be labeled “Find Me Result”.
The following dialog will then be displayed: