Specifications

Page 66 of 89
6.3 Differences between Line Arrays and Anya Arrays in the Assistant
When Anya is selected as the loudspeaker type, the Coverage Goals dialogue is slightly
different than with a mechanically-articulated line array. Array Options and Coverage
are replaced with just Coverage. The user is able to define a horizontal coverage angle
requirement, as well as “coverage start” and “coverage stop” distances (along the X-Y
plane) for each Anya column individually.
Options
Columns driven uniformly - Selecting Columns driven uniformly will configure the
system to provide the maximum output from all columns. This option should be
selected if maximum SPL is desired at the cost of consistency over the audience
surfaces.
Columns driven Adaptively - Selecting Columns driven Adaptively will adjust the
relative level between columns in the arrays in order to provide the most
consistent SPL levels at the audience surface. This option should be used by default
and will provide the most consistent SPL over the audience area.
The Coverage Goal and SPL Requirement sliders function as they do with all other
arrays.