Specifications

Page 52 of 89
Now we can see a relatively basic venue setup comprised of two surfaces: a main
surface and a balcony. These surfaces are representing the heads of the people so
when we focus loudspeakers in the area, we know how the audience will receive the
acoustical information.
Front of House Position
5.5
One item that we should also consider altering is the position of the Front of House. It
is extremely important to know what the engineer will hear when the audio is playing
so placing the front of house accurately within the model is important.
1. In the Project Explorer select “Venue” and the Front of House properties will
appear in the Properties pane.
2. For our model, let’s leave the Front of House position on the Main Surface
but let’s move it to a little bit better location than where it currently is in our
venue.
 Let’s start by changing its X location to 75’
 Let’s put in 10’ in the Y location which will move the Front of House
position 10’ to the right. A negative value would have moved it to the
left.