Specifications

Page 37 of 89
4.7 Selecting the Net or Net Aux Input
Un-check the On-ramp checkbox and select which Dante Network you want to use,
Net Main or Net Aux, then select which Dante channel you want the Array to
receive. This may be an Adaptive module transmitting an Analog or AES input or
other Dante on-ramp source such as your Dante equipped digital mixing console.
All other Adaptive modules in that Array will automatically be configured to
receive the Dante audio signal from that source.
Repeat the Input Source assignment for the remaining Arrays in the system. If the
remaining Arrays in the system are to receive the same signal as the first Array,
then select Net, then the Dante Source transmitting device such as the Anya
module receiving the Analog or AES audio Input.