Specifications

Page 36 of 89
4.6 Selecting Analog or AES Input
Checking the On-ramp box tells the Adaptive Module to transmit the incoming analog
or AES-EBU audio signal over the Dante network. Select which input you wish to use,
Analog, AES L or AES R, then select which physical Adaptive module will receive the
signal. All other modules in the Array will be automatically configured to receive the
Dante audio signal from the transmitting module. No further input assignments are
required for that Array.
WARNING: Users should not loop than two modules with AES/EBU. Doing so will
degrade the AES signal resulting in unpredictable behavior.