Specifications

Page 28 of 89
number of modules included in the system. These switches do not include a DHCP server.
Each Anya module includes an Audinate Dante Network Interface Card (NIC). If the
module does not detect a DHCP server on the network, then all modules will default to
the Private Network range of IP addresses and each module will select a unique IP
address from the following ranges:
 Primary Network (in redundant networks) and non-redundant networks
o IP Address Range: 169.254.###.###
o Subnet Mask: 255.255.0.0
 Secondary Network (in redundant networks only)
o IP Address Range 172.31.###.###
o Subnet Mask: 255.255.0.0
The computer running Resolution 2 connected to the network can automatically
select an IP address in the primary network range if no DHCP server is detected on
the network, but it generally is a best practice to manually assign your computer IP
address and Subnet Mask in the Private Network range to speed up the discovery
process. A computer on the Secondary network must be manually assigned an IP
address in the range 172.31.###.###.
*Note: All Adaptive modules and the control computer must be connected to the
same network!
 All Primary Ethernet ports on every Adaptive module must be connected to the
same Primary network on the switches and Secondary ports to Secondary
network on the switches.
 All switches must be linked Primary to Primary, Secondary to Secondary.
 Any Dante source device such as mixing consoles must also be connected to
the same Primary and Secondary networks.