Specifications

Page 20 of 89
In almost all cases, these functions duplicate those provided by the icons directly to the
right of Project Explorer items. The exception to this is as follows:
Insert item above/below - Adds an item above or below the currently-selected array
item. This may be a flybar, adapter bar, subwoofer, or line array module depending on
the type of item currently selected.
3.4 The Properties Window
The Properties area is divided into two columns. On the left is the property and on the
right is the value. The property column is fixed and cannot be altered. The value area
is where adjustments are made and access to the value is achieved by clicking in the
associated box on the right.
Front of House (FOH)
a. Select on which surface FOH will be placed.
b. X - Select the distance along the X-axis where the FOH location will be
placed.
c. Y - Select the distance along the Y-axis where the FOH location will be
placed.
Temperature and Humidity
This area allows the user to define the current temperature and state of humidity
within the venue. This is extremely important when taking advantage of the air-loss
compensation feature available in EAW, DSP driven products.
Temperature - Enter the current temperature within the venue. This value can be
updated at any time.
Humidity - Enter the current humidity within the venue. This value can be updated
at any time.
SPL Options
The user has the option to let the software automatically adjust the SPL range for
selected loudspeakers in the design or else manually set the upper and lower
extremities of the measurement. The user can also select specific frequencies to map
in the model.
Min SPL - Select the minimum amount of SPL that will be displayed in the SPL map
Max SPL - Select the maximum amount of SPL that will be displayed in the SPL
map.