Specifications

EAW Smaart 6 Operation Manual Smaart 6 Commands
93
5. Select an input or output to control from the External Devices menu (left of
Figure 5-2). A floating control dialog for the selected channel appears, like the
one on the right of Figure 5-2. The position of all filters currently available
on the selected device channel should now be indicated by markers on the
Magnitude plot.
If you do not see any markers on the Magnitude plot there are two possibilities:
There is a communication problem or the device being controlled allocates filters
dynamically and has no filters yet assigned on that channel. In the latter case,
Shift + Click on the Magnitude plot or click the New button on the control dialog
to create a new filter. If you suspect a communication problem, click the Config
button on the control dialog and check your configuration settings. Also check
your cabling and applicable configuration settings on the device itself.
5.2.2 Remove Device
Remove a device by selecting External Devices->Device Name->Remove (see left
of Figure 5-2). The device is removed from the External Devices menu.
5.3 Options Menu
5.3.1 Spectrum
Figure 5-3 Spectrum tab in Options dialog