Specifications

EAW Smaart 6 Operation Manual Smaart 6 Commands
92
1. Select the new device from External Devices->Add (left of Figure 5-1). The
device’s Configuration dialog appears (right of Figure 5-1).
If the device you want to control does not appear in the list of supported models,
check our website for recently added device control drivers. If you cannot find
it there, contact the manufacturer of that device directly.
2. Type a name for the device in the Device Name field. This name appears in the
External Devices menu after configuration (left of Figure 5-2).
3. Type names for the inputs/outputs in their Name fields, and check the boxes
for the inputs/outputs that you wish to appear in the device’s flyout menu (left
of Figure 5-2).
Figure 5-2 Selecting (left) and configuring (right) a newly added external device input
4. You will also set up communications parameters, unit IDs, etc. as required by
your specific device. Refer to the device’s manual and/or documentation for its
bundled control software for specific information.
NOTE: Smaart 6 does not currently support MIDI communications.