Specifications

EAW Smaart 6 Operation Manual Getting Started
18
1.4.5 Measurement Mode Buttons
The Measurement mode buttons provide one-click access to Smaart’s three primary
measurement types:
• Spectrum: See Spectrum Measurements on page 38.
• Freq. Resp.: See Frequency Response Measurements on page 44.
• IR Analysis: See Delay and Impulse Response Measurements on page 52.
Figure 1-6 Display mode (left) and Measurement mode (right) buttons
1.4.6 Display Controls
The RTA, Spectrograph, Magnitude, and Phase buttons at the top of the Plot Area
(left of Figure 1-6) display different information based on the same input data. Although
the buttons at the top of the plot remain the same, Capture, Load, and Legend are
disabled in Spectrograph display.
1.4.7 Reference Trace Controls
Figure 1-7 Capture and Load buttons
The Capture and Load buttons store and display RTA, Frequency Response, and
Phase traces, respectively. See Capturing and Loading Measurement Data on page 60.