Specifications

EAW Smaart 6 Operation Manual Getting Started
17
1.4.1 The Menu Bar
Smaart’s most frequently used functions and commands are available as on-screen
controls or keyboard shortcuts. Pull-down menus in the Menu Bar provide an alternate
method of selecting many of these same functions, in addition to providing access to
some less frequently used features.
Figure 1-4 Menu bar
A menu command followed by “...” opens a dialog box. An arrowhead to the right of a
menu item indicates a sub-menu that appears to the right when selected.
1.4.2 The Plot Area
The largest section of the Smaart 6 program window is the Plot Area, used for all of
Smaart 6’s primary data displays. See Chapter 3: Analysis Modes and Display Types for
more information.
1.4.3 Cursor Readout
The cursor readout above the plot area provides numeric values for the location of the
mouse tracking cursor (white cross in Figure 1-5) in amplitude/magnitude, frequency
or time, and phase, depending on the current display. When a Locked Cursor is present,
its coordinates are also shown here, along with the delta between the locked and moveable
cursors (page 68).
Figure 1-5 Cursor readout
1.4.4 Start/Stop Buttons
In all real-time operating modes, clicking the Start button starts the Smaart 6 analyzer
and begins plotting data. The Start button turns to Stop during a measurement. Press
Stop to stop the measurement and view the display.