Specifications

EAW Smaart 6 Operation Manual Getting Started
14
1.3 Smaart 6 Signal I/O
This section discusses how to recognize your hardware and adjust signal levels.
1. Make sure your computer recognizes your sound card.
2. Connect any external audio devices.
3. Start Smaart 6.
Do not disconnect an external audio device while Smaart 6 is running.
4. Select the proper audio input and output device(s) and channel(s) by choosing
Options->Audio I/O.
The Options dialog appears with the Audio I/O tab selected (Figure 1-1).
Figure 1-1 Audio I/O tab of the Options dialog