Datasheet

03/26/2012 HPL-ED2011 V2.0 EN (UX111) 2 / 5
Degree of Protection IEC: IP20, UL/CSA Type: -
General
Standards   IEC/EN 60947, VDE 0660, UL, CSA
Climatic proofing   Damp heat, constant to IEC 60068-2-78
Damp heat, cyclic to IEC 60068-2-30
Ambient temperature  °C 
   Operating range to IEC/EN 60947
PTB: -5 °C - +55 °C
Open  °C - 25 - 50
Enclosed  °C - 25 - 40
Temperature compensation   Continuous
Weight  kg 0.07
Mechanical shock resistance  g 10
Sinusoidal
Shock duration 10 ms
Protection type   IP20
Protection against direct contact when actuated from front (EN 90274)   Finger- and back-of-hand proof
Main�conducting�paths
Rated impulse withstand voltage U
imp
V
AC
6000
Overvoltage category/pollution degree   III/3
Rated insulation voltage U
i
V 690
Rated operational voltage U
e
V
AC
690
Safe isolation to VDE 0106 Part 101 and Part 101/A1   
Between auxiliary contacts and main contacts  V
AC
300
Between main circuits  V
AC
300
Temperature compensation residual error > 40ºC  
0.25%/K
Current heat loss (3 conductors)   
Lower value of the setting range  W 2.5
Maximum setting  W 6
Terminal capacities 
mm
2

Solid 
mm
2
2 x (0.75 - 2.5)
Flexible with ferrule 
mm
2
2 x (0.5 - 1.5)
Solid or stranded  AWG 18 - 14
Terminal screw   M3.5
Tightening torque  Nm 1.2
Tools   
Pozidriv screwdriver  Size 2
Standard screwdriver  mm 0.8 x 5.5
Auxiliary�and�control�circuits
Rated impulse withstand voltage U
imp
V 6000
Overvoltage category/pollution degree   III/3
Terminal capacities 
mm
2

Solid 
mm
2
2 x (0.75 - 2.5)
Flexible with ferrule 
mm
2
2 x (0.5 - 1.5)
Solid or stranded  AWG 2 x (18 - 12)
Terminal screw   M3.5
Tightening torque  Nm 0.8 - 1.2
Tools   
Pozidriv screwdriver  Size 2
Standard screwdriver  mm 0.8 x 5.5
Rated insulation voltage U
i
V
AC
690
Rated operational voltage U
e
V
AC
500