Cut Sheet

ManualsBrandsEaton ManualsControl & AutomationC-h Contactor 3p Fvnr

11/13/2015 277698 - HPL-ED2015 V17.0 EN 1 / 12

Contactor,�3p+1N/O,�15kW/400V/AC3

Part�no. DILMC32-10(110V50HZ,120V60HZ)

Article�no. 277698

Catalog�No. XTCEC032C10A

Delivery�programme

Product range   Contactors

Application   Contactors for Motors

Subrange   Contactors up to 170 A, 3 pole

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

NAC-3: Normal AC induction motors: starting, switch off during running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with efficiency class IE3.

IE3-ready devices are identified by the logo on their packaging.

Connection technique   Spring-loaded terminals

Pole   3 pole

Rated�operational�current

  

AC-3   

380 V 400 V I

A 32

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 45

enclosed I

A 36

Conventional free air thermal current, 1 pole   

open I

A 100

enclosed I

A 90

Max.�rating�for�three-phase�motors,�50�-�60�Hz

  

AC-3   

220 V 230 V P kW 10

380 V 400 V P kW 15

660 V 690 V P kW 17

AC-4   

220 V 230 V P kW 4

380 V 400 V P kW 7

660 V 690 V P kW 10

Contacts

  

N/O = Normally open   1 N/O

Contact sequence  

Instructions   Contacts to EN 50

012.

Auxiliary current, coil connections with spring-cage connection technology.

Main current connections with screw terminals.

Can be combined with auxiliary contact   DILM32-XHIC..

DILA-XHIC(V)..

Voltage AC/DC   AC operation

Technical�data

General

Standards   IEC/EN 60947, VDE 0660, UL, CSA

Summary of content (12 pages)

PAGE 1
Contactor,�3p+1N/O,�15kW/400V/AC3 Part�no. Article�no. Catalog�No.
PAGE 2
Lifespan, mechanical AC operated Operations x 10 6 10 DC operated Operations x 10 6 10 Operating frequency, mechanical AC operated Operations/h 5000 DC operated Operations/h 5000 Climatic proofing Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +60 Enclosed °C - 25 - 40 Storage °C - 40 - 80 g 10 N/O contact g 7 N/C contact g 5 g 6.9 N/O contact g 5.3 N/C contact g 3.
PAGE 3
Solid or stranded AWG 18 - 14 Stripping length mm 10 Screwdriver blade width mm 3.5 V AC 8000 Tool Main�conducting�paths Rated impulse withstand voltage Uimp Overvoltage category/pollution degree III/3 Rated insulation voltage Ui V AC 690 Rated operational voltage Ue V AC 690 between coil and contacts V AC 440 between the contacts V AC 440 A 384 220 V 230 V A 320 380 V 400 V A 320 500 V A 320 660 V 690 V A 180 Safe isolation to EN 61140 Making capacity (p.f.
PAGE 4
380 V 400 V P kW 15 415 V P kW 19 440 V P kW 20 500 V P kW 23 660 V 690 V P kW 17 220 V 230 V Ie A 15 240 V Ie A 15 380 V 400 V Ie A 15 415 V Ie A 15 440 V Ie A 15 500 V Ie A 15 660 V 690 V Ie A 12 P kWh 220 V 230 V P kW 4 240 V P kW 4.5 380 V 400 V P kW 7 415 V P kW 7.5 440 V P kW 8 500 V P kW 9 660 V 690 V P kW 10 60 V Ie A 40 110 V Ie A 40 220 V Ie A 40 440 V Ie A 2.
PAGE 5
60 Hz Pick-up VA 67 60 Hz Sealing VA 8.7 60 Hz Sealing W 2.6 50/60 Hz Pick-up VA 62 58 50/60 Hz Sealing VA 9.1 6.5 50/60 Hz Sealing W 2.5 2 DC operated Pick-up W 12 DC operated Sealing W 0.
PAGE 6
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. 10.11 Short-circuit rating Is the panel builder's responsibility. The specifications for the switchgear must be observed. 10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be observed. 10.
PAGE 7
Characteristics 1: Overload relay 2: Suppressor 3: Auxiliary contact modules 11/13/2015 277698 - HPL-ED2015 V17.
PAGE 8
Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged flaps Bucket-elevators Air conditioning system General drives in manufacturing and processing machines 11/13/2015 277698 - HPL-ED2015 V17.
PAGE 9
Extreme switching duty Squirrel-cage motor Operating characteristics Inching, plugging, reversing Electrical characteristics Make: up to 6 x rated motor current Break: up to 6 x rated motor current Utilization category 100 % AC-4 Typical applications Printing presses Wire-drawing machines Centrifuges Special drives for manufacturing and processing machines 11/13/2015 277698 - HPL-ED2015 V17.
PAGE 10
Dimensions Contactor with auxiliary contact module 11/13/2015 277698 - HPL-ED2015 V17.
PAGE 11
Lateral clearance to earthed parts: 6 mm Additional�product�information�(links) IL03407014Z�(AWA2100-2127)�Contactor IL03407014Z (AWA2100-2127) Contactor ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407014Z2012_03.pdf UL/CSA: Approved rating data http://de.ecat.moeller.net/flip-cat/?edition=HPLTE&startpage=5.84 UL/CSA: UL/CSA: Special Purpose Rating http://de.ecat.moeller.net/flip-cat/?edition=HPLTE&startpage=5.85 UL/CSA: UL/CSA: Short Circuit Current Rating (SCCR) http://de.ecat.
PAGE 12
Effect of the Cabel Capacitance of Long Control http://www.moeller.net/binary/ver_techpapers/ver949en.pdf Cables on the Actuation of Contactors Motor starters and "Special Purpose Ratings" for the North American market http://www.moeller.net/binary/ver_techpapers/ver953en.pdf Switchgear for Luminaires http://www.moeller.net/binary/ver_techpapers/ver955en.pdf http://www.moeller.net/binary/ver_techpapers/ver956en.