Installation Manual

Menu Information
42 9000X AF Drives MN04001004E—May 2011 www.eaton.com
Application Information
Hardware Information
Expander Board Information
S5.8.4
Application
Information
Applications
The Application information page includes information on not only the application currently in use but also on all other applications loaded
into the SVX9000/SPX9000. The information available is shown in the table below. Note that the “x” in the table refers to the sequential
number of the application in the list.
Name Content
A4.8.4.x Application name
D4.8.4.x.1 Application ID
D4.8.4.x.2 Version
D4.8.4.x.3 Firmware interface
S5.8.5
Hardware
Information
Hardware
The Hardware information page provides information on the following hardware-related topics:
Name Content
I5.8.5.1 Nominal power of the unit
I5.8.5.2 Nominal voltage of the unit
E5.8.5.3 Brake chopper
E5.8.5.4 Brake resistor
S5.8.6
Expander Board
Information
Expander boards
This parameter and its sub-items provide information about the basic and option boards plugged into the control board as shown in the table
below. Note that the “x” in the table refers to the sequential number of the slot, with slot A being “1” and slot E being “5”.
Name Content
E5.8.6.x Slot “x” board identification
E5.8.6.x.1 Operating state
E5.8.6.x.2 Software version
S5.8.7
Debug Menu
Debug
This menu is meant for advanced users and application designers. Contact the factory for any assistance needed.